Code Foils Switzerland

Code Foils

Code Foils assembly, bolts, care and warranty

A foil lasts longer when it is assembled and stored properly. Here is what Code advises, and what its warranty covers.

Assembly tips

Most damage happens out of the water, so store foils in their cases and take care with trailing edges.

  • Do not use drills or impact drivers. Power tool damage is not covered by the warranty.
  • Do not over tighten screws. Stripped threads are not covered.
  • Use 30 to 35 mm bolts at the front wing to fuselage junction.
  • Code recommends Torx countersunk bolts.

Titanium bolt kits

The full Titanium Bolt Set includes T nuts, M8 T30 28 mm base plate bolts, M6 T30 30 mm fuselage bolts, M6 T30 16 mm tail bolts, two T30 tools and a soft zip case. Each segment has one spare bolt.

The bolt heads sit flush to reduce drag, and the smaller Base Plate Kit covers the base plate only.

Safety

Foiling can be dangerous. Code advises these basics.

  • Never foil in a crowded lineup or near other surfers.
  • Always wear a leash.
  • Wear a helmet and impact vest.
  • Learn in small waves.
  • Stay in deep water, away from reef and sandbars.
  • Do not foil alone.

Warranty

Code offers a 12 month warranty against manufacturing defects on foils and hardware bought from authorised retailers. You need proof of purchase, and it applies only to the original buyer.

It does not cover normal wear, cosmetic damage, misuse, impacts, corrosion, UV or transport damage, modified products or commercial use. Used and demo products are not covered. To claim, take the product back to the dealer you bought it from.

Questions

How long is the Code Foils warranty?

12 months from the date of purchase, against manufacturing defects.

Can I use a drill on foil bolts?

No. Damage from power tools is not covered by the warranty.

Are Code Foils demo products covered?

No. Used and demo products do not carry a warranty.

Films

Watch

Code Foils | How to assemble your setup

Tech talk

Shop the range

Keep reading